ATTSII Recommends Guidelines For A Suitable Electronic Toll Collection Standardisation For India

July 31, 2008

PROPOSES WORLD WIDE TESTED AND RECOGNIZED CEN 278, BASED ON DSRC MICROWAVE TECHNLOGY

New Delhi, 23rd July, 2008: The Association of Toll and Traffic Systems Integrators of India (ATTSII) has recommended guidelines for a suitable Electronic Toll Collection (ETC) to the working group formed by the Committee of Road Safety and Traffic Management, Ministry of Surface Transport and Highways to determine the technology for Advance Traffic Management Systems, Advance Travel or Information Systems and Electronic Toll collection Systems. The association proposes CEN 278 standard based on DSRC (Dedicated Short Range Communication) microwave technology for the Indian subcontinent keeping in mind the Indian environment and driving conditions.

Representing the association, Mr. Sachin Bhatia, President ATTSII and Country Director of KAPSCH METRO JV said, “CEN 278 is the most acceptable technology worldwide with interoperability standards. It is already successfully implemented at the Delhi – Gurgaon Expressway, the largest 32 lane toll plaza in India. Introduction of smart tags based on microwave technology has received overwhelming response from drivers who earlier had to wait in long queues for several hours at the Toll. Now, it only takes few seconds for each vehicle to pass through, significantly reducing waiting time. CEN 278 is a cost effective technology as multiple vendors are present in the market to ensure that customers get the best competitive deal.

“At a time when India is starting to put in place the ETC technology, it should adopt the most advanced technology that is pre tested, allows wider applications and faster data transfer speed. We cannot afford to lose time in deciding on a technology as there is an urgent need to meet the ever increasing traffic management requirements in India that suits the masses and is most viable to implement,” said Mr. Aman Kishore ,VP of the ATTSII and Managing Director of International Road Dynamics (IRD) South Asia.

“IRD have successfully implemented CEN 278 standard microwave based Electronic Toll Collection(ETC) technology in April 2006 at Hoogly River Bridge Commissioners (HRBC) site at Vidyasagar Setu – Kolkata. HRBC is a West Bengal Government organization for operation, implementation and maintenance of Hoogly Bridge. Currently, it has 24 lanes at 1 Plaza with 4 ETC Lanes and is efficiently meeting requirements of the department to cater to heavy traffic volumes in a matter of seconds at the entry to Kolkata city,” added Mr. Kishore.

He further explained, “Most of the Build Operate Transfer (BOT) operators are opting for technology for ETC which is more cost effective and operationally efficient for Indian conditions. Recently, we have bagged an order for implementation of CEN 278 standard microwave based ETC from one of biggest BOT and O&M operators in the country – Ideal Road Builders (IRB), Mumbai for one of its locations at Mumbai’s Entry Points. The decision of opting for Microwave based ETC technology by such a reputed company must have been taken after much due diligence.”

“The major advantage of the microwave technology is the presence of numerous vendors in the market that generates fair competition. We must understand the emerging traffic volume in our country and we must opt and guide for technology which best meets diverse user needs and national interest, rather than being guided by commercial interest of vendors.

“CEN 278 standard is based on microwave technology, making it more reliable, robust and viable. A very recent example is the stormy morning of 14th May; any other known standards based on other technologies like infrared would have created chaos at points where it would have been applied. This is because in dusty weather, data fails to be securely transmitted, resulting in distortion in reporting and further leading to revenue leakages at tolling booths. As ATTSII represents the road operators in India, we sincerely hope to provide the best infrastructure and cost effective method of ETC for the end benefits for our people, we strongly recommend CEN 278 to be included as a policy due to its advantages outweighing that of any other present technology, pre -tested and widely accepted”, further explained Mr. Bhatia.

“It is a proven technology being used for electronic toll collection for many years around the world. This proves also our more than 140 reference projects in 30 countries in the Asian/Pacific region, Europe, Australia, Latin America and in South Africa. This technology guarantees thanks the reliability of the tolling system and the low error rate the maximum toll income and it is the perfect choice for charging on motorways, expressways and even secondary main roads. With respect to interoperability the DSRC is the only working technology today providing the necessary standards and specifications. We have also already made very good experiences with using of the DSRC tolling systems for the improving of the road safety and for the optimizing of the traffic flow by the installation of traffic data sensors or variable message signs on the toll gantries,” said Erwin Toplak, Management Board, Kapsch TrafficCom AG.

About ATTSII

The Association of Toll and Traffic Systems Integrators of India (ATTSII) has been established in India for the Toll and traffic Industry players to share their views; ideas and technologies through a common platform. The Association comprises of the leading players of the Industry as below:

IRD, Canada / India
Kapsch TrafficCom AG; Austria/ India
GEA; France / India
CS ROUTE ; France/ India
Metro Road Systems ; India
Q-Free / Comvision , India

About Kapsch TrafficCom AG

Kapsch TrafficCom AG is an international supplier of innovative road traffic telematics solutions. Its principle business is the development and supply of electronic toll collection (ETC) systems, in particular for the multi-lane free-flow (MLFF) of the traffic, and the technical and commercial operation of such systems. Kapsch TrafficCom also supplies traffic management systems, with a focus on road safety and traffic control, and electronic access systems and parking management. With more than 140 reference projects in 30 countries in Europe, Australia, Latin America, in the Asian/Pacific region and in South Africa, and with almost 12 million on-board units (OBUs) and nearly 11,000 equipped lanes, Kapsch TrafficCom has positioned itself among the leading suppliers of ETC systems worldwide. Kapsch TrafficCom is headquartered in Vienna, Austria, and has subsidiaries and representative offices in 20 countries.

For further media queries contact:

Alka Ohja / Archana Sharda
Blue Lotus PR
[email protected] / [email protected]
011-46571241 / 42
9958443490 / 9811838332

Written by ITW Editor · Filed Under CEN 278, Default, Investment and Finance

HCC joint venture bags Rs639-crore Andhra irrigation project contract new

July 31, 2008

Mumbai: Hindustan Construction Company (HCC) jointly with SEW Infrastructures Ltd and Megha Engineering & Infrastructures Ltd (MEIL) has bagged a Rs639-crore contract for building a barrage of around 3.5 km on river Pranahita near Tummidi Hetti village in Adilabad district of Andhra Pradesh.

HCC will have a share of Rs326.03 crore in the work being undertaken for the Pranahitha-Chevella Package-3 being undertaken by the Irrigation & Command Area Development (ICAD) department of the government of Andhra Pradesh.

The contract covers detailed investigation, preparation of designs, drawings and construction of a barrage including fixing of gates, head regulator and 500 meter long gravity canals. The project will be completed in 48 months.

The project is a part of the government’s ‘Jalayagnam’ programme, an initiative to provide immediate irrigation benefits to all underdeveloped regions of Andhra Pradesh.

Pranahitha-Chevella lift irrigation scheme will irrigate an ayacut of 12.20 lakh acres and provide drinking water to about 1,000 villages in Adilabad, Karimnagar, Nizamabad, Medak, Nalgonda and Rangareddy districts in Telangana region.

HCC is currently involved in construction of Godavari lift irrigation phase I and Phase II in Andhra Pradesh where Phase I has already been commissioned and phase II is in advanced stages of completion. In addition, HCC is currently executing four major projects in Andhra Pradesh, including the country’s first cavern for strategic storage of crude oil at Visakhapatnam, the Veligonda lift irrigation project, the Rajiv Sagar lift irrigation project and a 30 km highway of NHAI on NH-7 under north-south corridor on BOT basis.

HCC constructed the first bridge over the river Godavari at Shahgar, in Andhra Pradesh way back in the 1930s. Since then it has built several infrastructure projects, including the Godavari Barrage at Rajahmundry, the Papavinasam Dam, the Vizag Monolith & West Wall Protection and the Railway Bridge over Godavari which is the first and only bow-string bridge in India, the company said in a release.

HCC has so far constructed over 45 dams, barrages and 15 powerhouses in the sub continent, contributing to over 30 per cent of the country’s installed hydropower capacity.

Source: domain-b.com

Written by ITW Editor · Filed Under Investment and Finance